1 3 2 4 5 6 pressure reference gauge 0 ~ 9.81 {0 ~ 0.1} 0 ~ 49.0 {0 ~ 0.5} 0 ~ 98.1 {0 ~ 1} 0 ~ 343 {0 ~ 3.5} 0 ~ 490 {0 ~ 5} 0 ~ 981 {0 ~ 10} 0 ~ ? 98.1 {0 ~ ? 1} kpa {kgf/cm 2 } rated pressure range 0.06 % f.s./c 0.1 % f.s./c part name material glass stand seat brass + nickel-plated y t 1 t 1 y sus 304 for 102v borosilicated glass fluoro-rubber silicone aluminum vinyl chloride resin fitting sensor chip o ring housing cable 1 2 3 4 5 6 internal structure (gauge type) high output gain by built-in hybrid electronic amp. built-in temperature compensation function (0 ~ 50 c) pressure medium compatible with both liquid and gas pressures (gauge) features model number designation list of model numbers pa-500 - 501 g - 06 series name rated pressure range 101 0 ~ 9.81 kpa {0 ~ 0.1 kgf/cm 2 } 501 0 ~ 49.0 kpa {0 ~ 0.5 kgf/cm 2 } 102 0 ~ 98.1 kpa {0 ~ 1 kgf/cm 2 } 352 0 ~ 343 kpa {0 ~ 3.5 kgf/cm 2 } 502 0 ~ 490 kpa {0 ~ 5 kgf/cm 2 } 103 0 ~ 981 kpa {0 ~ 10 kgf/cm 2 } thermal error 06 0.06 % f.s./c 10 0.1 % f.s./c pressure reference g gauge v gauge (vacuum) pa-500 -501g-06 pa-500 -101g-10 pa-500 -501g-10 pa-500 -102g-10 pa-500 -352g-10 pa-500 -502g-10 pa-500 -103g-10 pa-500 -102v-10 pa-500 -102g-06 pa-500 -352g-06 pa-500 -502g-06 pa-500 -103g-06 pa-500 -102v-06 thermal error y not available t verify the above model numbers when placing orders. pressure transducers with amp. pa-500
general specifications power analog output standard specifications item pressure reference rated pressure range maximum pressure break-down pressure operating temp. range compensated temp. range storage temp. operating humidity thermal error 0 ~ 50 c (reference temp.: 25 c) supply voltage ripple content consumption current output voltage zero voltage span voltage output current linearity/hysteresis pressure medium insulation resistance dielectric strength pressure port supply voltage effect response net weight model number pa-500 101g 501g 102g 352g 502g 103g 102v gauge gauge(vacuum) 9.81 49.0 98.1 343 490 981 C 98.1 {0.1} {0.5} {1} {3.5} {5} {10} { C 1} 19.6 98.1 196 686 981 1961 196 {0.2} {1} {2} {7} {10} {20} {2} 49.0 245 490 1030 1471 2941 490 {0.5} {2.5} {5} {10.5} {15} {30} {5} non-corrosive gases / non-corrosive liquids approx. 85 1 ~ 5 1 ? 0.04 (at 25 c) 4 ? 0.04 (at 25 c) 1 load resistance: 5 k minimum ? 0.5 ? 0.3 ? 0.5 approx. 1 12 ~ 24 ? 10 % 10 % (p-p) 20 ma 100 (500 v dc) 500 v ac, 60 s leakage current 1 ma maximum r 1/4 g 1/4 (pt 1/4) (pf 1/4) 0 ~ 50 35 ~ 85 no condensation C 20 ~ 80 atmospheric pressure, humidity 65 %rh maximum C 20 ~ 80 ? 0.1 ? 0.06/0.1 ? 0.1 ? 0.06/0.1 ? 0.1 kpa {kgf/cm 2 } kpa {kgf/cm 2 } kpa {kgf/cm 2 } c c %rh c zero %f.s./c %f.s. span %f.s./c v dc maximum maximum v v v ma maximum m minimum v maximum ms g ? unless otherwise specified, the specs are defined at an ambient temperature of 255 c and excitation voltage of 12 v dc. pa-500 pressure transducers with amp.
zero span p r e s s u r e t r a n s d u c e r c o p a l e l e c t r o n i c s p a C 5 0 0 C 19 m 5 depth 6 (52.2) 13.5 8 27.2 zero adjustment vr aluminium with alumite finish span adjustment vr r 1/4 (pt 1/4) (brass + ni C plated) zero span p r e s s u r e t r a n s d u c e r c o p a l e l e c t r o n i c s p a C 5 0 0 C 19 m 5 depth 6 (49.7) 12 7 27.2 zero adjustment vr aluminium with alumite finish span adjustment vr g 1/4 (pf 1/4) (sus 304) 28 28 4-core shielded cable l = 600 +100 0 +100 0 ( 3.6) awg26 4-core shielded cable l = 600 ( 3.6) awg26 pa-500 pressure transducers with amp. wire color red white green black shield connection internal electrical schematics pa-500-xxxg pa-500-xxxv power b output n.c. common fitting outline dimensions unless otherwise specified, tolerance : 0.5 (unit: mm) environmental characteristics test item test conditions (at 25 5 c) permissible change vibration 10 ~ 500 hz, 1.5 mm maximum/98.1 m/s 2 , 3 directions for 2 hours each 981 m/s 2 , 3 directions for 3 times each 0 ~ rated pressure, 10 6 cycles 40 c, 90 ~ 95 %rh, 240 hrs. zero voltage/span voltage: 1 %f.s. maximum each shock pressure cycling moisture resistance shield main circuit pressure sensor common output power b
|
